Prestige Tile & Stone Cleaning
Serving San Diego County
Residential & Commercial
Mon–Fri 8am–5pm · Sat 10am–2pm
Home › Services › Tile & Grout Cleaning
Tile & Grout Cleaning
Tile & Grout Cleaning in San Diego
Deep cleaning for tile floors, walls, showers and countertops that lifts the soil, grease and residue trapped in porous grout lines. We clean, extract and, if you choose, seal the grout so it stays cleaner for longer.
Quick answer
What Is Professional Tile and Grout Cleaning?
Professional tile and grout cleaning is a deep clean that removes the dirt, grease and residue that daily mopping leaves in grout lines. We apply an acid-free, commercial-grade cleaner, work it into the grout with brushes, then flush and extract it with hot water and high-volume suction. A penetrating sealer can be added afterward to help the grout resist new stains.
We clean tile and grout on floors, walls, countertops, patios, bathrooms, showers and pools, in homes and in commercial buildings throughout San Diego. You do not have to scrub on your hands and knees with a toothbrush; we do the work, and we do not use high-pressure sales tactics.
Why it matters
Why Grout Gets Dirty Even When You Mop
Grout is porous. Its surface is full of tiny gaps that trap soil, spills and debris, so even when the tile face looks clean, grout lines in entryways, hallways, kitchens, bathrooms and showers darken over time.
A mop spreads some of that soil back into the grout, and store-bought cleaners can be too abrasive or too acidic, or leave residue behind. Scrubbing hard can even wear grout away and damage the tile finish. Regular professional cleaning removes the buildup safely and helps the tile and grout last longer.
Most homes benefit from professional tile and grout cleaning at least once a year, and sooner whenever you notice grout darkening or staining.
Service snapshot
Tile & grout cleaning
- Best for
- Ceramic and porcelain tile with darkened or stained grout
- Where
- Floors, walls, showers, backsplashes, countertops, patios and pools
- Typical time
- About 1.5 hours per floor area, depending on size and soil
- After sealing
- Allow at least 24 hours to cure
- Service area
- San Diego County, residential and commercial
Where we clean
Tile and Grout Throughout Your Home or Business
Grout is used wherever there is ceramic or porcelain tile, and the same careful approach works in every room. Stone floors are pre-tested first, because acidic cleaners must never touch marble or other calcium-based stone.
Floors, entries & hallways
High-traffic areas where grout darkens first and tracked-in grit wears the surface.
Kitchens & backsplashes
Grease and food residue that settle into grout around cooking areas.
Bathrooms & showers
Soap, shampoo and hard-water buildup on walls, pans and corners.
Commercial floors
Tile and grout washing for businesses and managed properties across the city.
Our process
How We Clean Tile and Grout
Our technicians set up the cleaning system for your specific floor, so the method suits the tile and the amount of soil. Each floor area usually takes about an hour and a half, depending on how dirty it is and how large.
01
Apply the cleaner
An acid-free, commercial-grade cleaner is applied to break down the grease and residue that have built up over time.
02
Work the grout lines
Soil clings to grout, so the cleaner is worked into hard-to-reach grout lines with brushes.
03
Hot-water extraction
Concentrated hot water and high-volume suction flush the grout and pull the loosened soil out of it.
04
Seal the grout
If you choose, a penetrating sealer closes the open pores and helps colored spills stay on the surface.
05
Let it cure
After sealing, allow 24 hours or more. Do not mop or drag items across the floor, and walk on it gently for a full day.
Before & After
Results on Real Surfaces
Results depend on the material, how long buildup has been there and the condition of the surface underneath.
Sealing
Why Seal Your Grout After Cleaning?
Sealing is optional, and you can choose which areas to seal. For most homes it is worth it: a penetrating sealer reduces the porous areas where soil and spills bind to the grout, so freshly cleaned grout stays cleaner and resists discoloration.
Sealed grout needs less heavy scrubbing and fewer harsh cleaners, which reduces wear. That matters, because removing and replacing old grout is costly.
Sealing also helps in wet areas. In kitchen and bathroom backsplashes, water can seep through cracked, unsealed grout into the wall behind it and cause damage. A sealer adds resistance to moisture and helps freshly cleaned grout hold up.
Between visits
Safe Ways to Keep Grout Clean at Home
Between professional cleanings, a few simple methods help keep ceramic and porcelain tile and grout looking good. Never use vinegar or other acidic cleaners near marble or other calcium-based stone.
- Diluted vinegar (ceramic and porcelain only): mix equal parts white vinegar and hot water in a spray bottle, spray the grout, leave it at least 5 minutes, then scrub with a stiff brush.
- Baking soda paste: mix about half a cup of baking soda with a little water until it spreads, apply it to the grout and scrub.
- Hydrogen peroxide: for mild stains, apply it directly and rinse, or make a paste of one part dish soap, one part baking soda and two parts hydrogen peroxide, scrub it in and rinse with lukewarm water.
When these no longer get the grout clean, it is time for a professional deep clean.
Compare the options
Cleaning, Sealing or Regrouting?
Most grout only needs cleaning and, ideally, sealing. Regrouting is for grout that is physically failing.
| Situation | What we recommend | What it does |
|---|---|---|
| Grout is dark or stained but intact | Tile & grout cleaning | Removes embedded soil and residue from the grout and tile face |
| Grout is clean but stains quickly | Grout sealing | Closes open pores so spills stay on the surface |
| Grout is cracked, crumbling or missing | Regrouting | Removes failed grout and replaces it with new grout |
| Tile is natural stone, not ceramic | Natural stone cleaning | Uses stone-safe, non-acidic products after pre-testing |
Estimates
What Affects Your Estimate
Every estimate is based on the surface itself, and you receive it in writing before any work is booked. These are the main factors that shape it.
Floor area
Each floor area usually takes about an hour and a half, depending on its size.
How much soil
Heavily soiled grout takes longer to clean and extract than lightly soiled grout.
Sealing
Sealing is optional, and you choose which areas to seal.
Grout condition
Cracked or missing grout needs regrouting, which is a different job from cleaning.
Service Area
Tile & Grout Cleaning Across San Diego
We clean tile and grout on floors, walls, countertops, patios, bathrooms, showers and pools for homes and businesses throughout San Diego County. Commercial work can be scheduled around your operating hours.
Related services
Related Services
Cleaning
Bath & Shower Tile
Soap film and scale removed from showers.
Repair
Shower Regrouting
Failing grout removed and replaced.
Cleaning
Ceramic & Porcelain Tile
Dense tile with porous grout, cleaned right.
Sealing
Interior Tile Sealing
Penetrating sealers for tile and grout.
- Architectural Stone
- Cantera & Adoquin
- Cement Tile
- Concrete
- Concrete Pavers
- Countertops
- Cultured Stone
- Engineered Stone
- Exterior Stone
- Flagstone
- Glass Tile
- Granite
- Interior Floors
- Limestone
- Marble
- Metal Tile
- Mosaic Tile
- Natural Stone
- Onyx
- Quarry Tile
- Quartz
- Quartzite
- Saltillo & Mexican Tile
- Sandstone
- Slate
- Soapstone
- Terracotta
- Terrazzo
- Travertine
- Wood Floors
Common questions
Tile & Grout Cleaning FAQs
How often should tile and grout be professionally cleaned?
At least once a year in most homes, depending on how the space is used, and as soon as you notice grout darkening or staining. Daily mopping keeps the tile face clean, but grout traps dirt and debris that mopping cannot remove.
How long does tile and grout cleaning take?
Each floor area usually takes about an hour and a half, depending on its size and how much soil has built up.
Do I need to seal my grout?
It is optional, and you can choose which areas to seal. Sealing reduces the porous areas where dirt and spills bind to grout, helps it resist discoloration and reduces the need for heavy scrubbing.
How long should I wait after the grout is sealed?
Allow the sealer to cure for at least 24 hours. During that time, do not mop or drag items across the floor, and walk on it gently.
Can I use vinegar on my tile and grout?
Diluted vinegar is fine on ceramic and porcelain tile and grout, but never use vinegar or other acidic cleaners on marble or other calcium-based stone, because acids etch the surface.
Do you clean tile and grout for businesses?
Yes. We offer commercial tile and grout cleaning throughout San Diego, and work can be scheduled around your operating hours.
Will professional cleaning make my grout look new?
In most homes it makes a clear difference, because most dark grout is embedded soil that a deep clean can remove. It has limits: dye, rust or long-term mildew staining can be permanent, grout damaged by acidic cleaners will not come back, and old sealers can wear unevenly and leave a blotchy look. In those cases grout color sealing or regrouting may be the next step, and an assessment will tell you which applies.
How should I prepare for a tile and grout cleaning appointment?
Pick up rugs, mats and small items from the floors being cleaned, and clear bottles and shelves in showers and tub surrounds. Point out any stains or problem areas when the technician arrives so they can be checked first. Keep pets and children out of the work area until the floors are dry.
Get Started
Ready for Cleaner Tile, Grout & Stone?
Tell us what needs cleaning and we'll help you work out the right next step, with no pressure either way.
Free estimates
Surface-safe methods
Residential & commercial