Prestige Tile & Stone Cleaning
Serving San Diego County
Residential & Commercial
Mon–Fri 8am–5pm · Sat 10am–2pm
Quick answer
How Is Natural Stone Cleaned Professionally?
Natural stone is cleaned by first identifying the stone, then choosing products, water temperature and pressure that clean it without harm. We can use hot or cold water at a range of pressures, polish with wet sanding and diamond abrasives, and seal porous stone with non-toxic sealers. Every stone is different, so the method is chosen for yours.
Why it matters
Why Stone Care Gets Confusing
Natural stone is one of the most durable and distinctive materials for floors, walls, countertops, patios, pathways and exterior cladding, and it lasts when it is cared for properly.
Knowing how to care for it is harder. There are countless stone care products, conflicting advice from different "experts", and stone is often sold under trade names that do not tell you what it really is. Using the wrong cleaner can etch, dull or stain it.
We take that guesswork away. Whatever stone you have, we identify it, clean it with the right method and explain how to look after it between visits. We work with flagstone, granite, limestone, marble, pavers, slate, terrazzo and travertine, among others.
Service snapshot
Natural stone care
- Stones
- Marble, granite, travertine, limestone, slate, flagstone, terrazzo, pavers
- Services
- Cleaning, polishing, repair, restoration, sanitizing, sealing, stain removal
- Where
- Floors, walls, countertops, patios, pathways, cladding
- Service area
- San Diego County
Stone services
Natural Stone Treatments We Provide
One visit can combine several of these, depending on what your stone needs.
Cleaning
Hot or cold water at the right pressure for the stone, indoors and out.
Polishing
Wet sanding with diamond and nano abrasives removes scratches for a honed or polished finish, without dust.
Restoration
Before replacing stone, we examine it and plan a restoration that brings it back.
Sanitizing
Included with cleaning, with extra measures available for special requirements.
Stain removal
The right materials and methods to lift stains without damaging the stone.
Maintenance
Guidance and the right supplies for routine cleaning between visits.
Our process
How We Clean and Care for Natural Stone
Every stone is different, so each job starts with identifying the stone and ends with advice on caring for it.
01
Identify the stone
Stone is often sold under trade names, so we identify what you really have before choosing products.
02
Set the method
Hot or cold water and the right pressure are chosen for the stone, indoors or out.
03
Clean & treat stains
Soil and stains are removed with materials that will not damage the stone.
04
Polish & repair
Wet sanding with diamond and nano abrasives removes scratches without dust; chips and cracks are repaired.
05
Seal & advise
Porous stone is sealed with non-toxic sealers, and we explain how to care for it between visits.
Before & After
Results on Real Surfaces
Results depend on the material, how long buildup has been there and the condition of the surface underneath.
Sealing natural stone
Why Porous Stone Should Be Sealed
Porous natural stone should be sealed to reduce how much moisture gets in. That makes it easier to clean and lowers the chance of stains.
We use high-quality, non-toxic stone sealers, including options that enhance and preserve the color of the stone. Some sealers can also improve slip resistance on stone floors.
Sealing does not make stone stain-proof. It slows absorption so there is time to wipe up spills before they cause damage, and it works best on stone that has been thoroughly cleaned and allowed to dry.
Compare the options
How Common Stones Differ
Knowing what you have decides the cleaner, the pad and the sealer.
| Stone | Character | Watch out for |
|---|---|---|
| Marble | Calcium-based, veined, often polished | Acids such as vinegar or lemon juice etch it |
| Travertine | Calcium-based, porous, naturally pitted | Etching, staining and open holes |
| Limestone | Soft, calcium-based, neutral tones | Acids and abrasive cleaners |
| Granite | Hard, silica-based, crystalline | Acidic cleaners wear down the sealer |
| Slate | Layered silica stone, textured cleft surface | Porous; holds dirt in its grooves |
| Flagstone | Split sedimentary stone for patios and paths | Joints and surface washing out under high pressure |
Estimates
What Affects Your Estimate
Every estimate is based on the surface itself, and you receive it in writing before any work is booked. These are the main factors that shape it.
Type of stone
Soft, calcium-based stone and hard, silica-based stone need different methods.
Services combined
Cleaning alone, or cleaning with polishing, repair, stain removal and sealing.
Condition
Etching, scratches, stains and chips add restoration or repair work.
Area & location
The size of the surface and whether it is a floor, wall, countertop or outdoor area.
Service Area
Natural Stone Care Across San Diego County
We clean, polish, repair and seal natural stone floors, walls, countertops, patios, pathways and exterior cladding for homes and businesses throughout San Diego County, indoors and out.
Related services
Related Tile & Stone Services
Cleaning
Marble Cleaning
Care for acid-sensitive marble.
Cleaning
Travertine Cleaning
Cleaning, filling, honing and sealing.
Cleaning
Granite Cleaning
Counters and floors cleaned and sealed.
Restoration
Tile & Stone Restoration
Honing, polishing and refinishing.
Repair
Stain Removal
Deep stains drawn out of stone.
Sealing
Sealing & Maintenance
Protection and care plans.
- Tile & Grout
- Bath & Shower Tile
- Ceramic & Porcelain
- Architectural Stone
- Cantera & Adoquin
- Cement Tile
- Concrete
- Concrete Pavers
- Countertops
- Cultured Stone
- Engineered Stone
- Exterior Stone
- Flagstone
- Glass Tile
- Granite
- Interior Floors
- Limestone
- Marble
- Metal Tile
- Mosaic Tile
- Onyx
- Quarry Tile
- Quartz
- Quartzite
- Saltillo & Mexican Tile
- Sandstone
- Slate
- Soapstone
- Terracotta
- Terrazzo
- Travertine
- Pool Tile
- Wood Floors
Common questions
Natural Stone Cleaning FAQs
What types of natural stone do you clean?
Flagstone, granite, limestone, marble, pavers, slate, terrazzo and travertine, along with onyx, quartzite, sandstone, soapstone and more, indoors and outdoors.
Is polishing messy?
No. We polish with wet sanding methods using diamond and nano abrasive compounds, and the process is dustless.
Should all natural stone be sealed?
Porous natural stone should be sealed to reduce moisture absorption, which makes it easier to clean and lowers the chance of staining. We use non-toxic sealers, including color-enhancing options.
Can damaged stone be restored instead of replaced?
Often, yes. We examine the stone and plan a restoration or repair before you decide to replace it, and some chips and cracks can be repaired with near-invisible fixes.
Can I remove stone stains myself?
There is a lot of DIY advice, but the wrong product can damage stone. We know which materials and methods remove each kind of stain safely.
Get Started
Ready for Cleaner Tile, Grout & Stone?
Tell us what needs cleaning and we'll help you work out the right next step, with no pressure either way.
Free estimates
Surface-safe methods
Residential & commercial